Raised-panel steel
Carriage house
Modern flush
Full-view glass
LiftMaster openers
Chamberlain openersFull 25-point door and opener safety check with every visit - springs, cables, rollers, tracks, and your LiftMaster or Chamberlain opener included
You get a price before we start. It does not change when the truck arrives.
Get your free estimateAmarr Cable & Drum Replacement: The Fort Lauderdale Owner’s Guide
Amarr cable and drum replacement in Fort Lauderdale typically runs $130 – $250 when both cables are replaced, with drum replacement adding roughly $40 – $80 per drum depending on the Amarr series. We stock Amarr-compatible cables and drums on the truck, so most jobs are completed the same day you call. You’ll usually spot the failure before the door fully gives out: the door hangs slightly crooked on one side, or you hear a metallic grind near the top rail, or you walk into the garage and see a frayed cable dangling loose where it should be taut.
If your Amarr door is doing any of that, this page will walk you through exactly what failed, what it costs to fix in the Fort Lauderdale market, and what you should do before the door comes down hard. Wade Mercer and our crew at Brock Garage Doors Fort Lauderdale have replaced enough Amarr cables and drums across this city to know what fails first, why it fails, and what it takes to fix it right the first time.
Which Amarr Models This Applies To
The cable and drum system on an Amarr door is not one-size-fits-all. Amarr builds residential doors across three main lines: the Heritage series (steel, most common in Florida garages), the Classica collection (steel with wood-grain finish), and the carriage-house style doors that use a different track profile altogether. Each series uses specific drum diameters and cable lengths matched to the door’s weight and the torsion spring’s torque output.
Here’s the compatibility gotcha most homeowners don’t know: an Amarr door with a 2-inch torsion shaft takes a different cable length than one with a 1-inch shaft, even if both doors look identical from the driveway. We measure the drum and count the cable winding pattern before ordering anything. You can help by checking the model sticker on the inside edge of the top panel. Look for a number starting with “AM” followed by four digits. If the sticker is gone, we match the drum’s outer diameter and cable thickness to the spring’s wire gauge. On Amarr doors specifically, OEM cables generally outlast generic aftermarket cable by a year or two in South Florida humidity, but a quality aftermarket set is perfectly serviceable when the drum is still in good shape. The drum matters more than the cable brand, frankly.
Brock Garage Doors Fort Lauderdale is an independent service provider. We are not an Amarr dealer or affiliate. We work on Amarr doors every week, and we stock the parts because they’re common across South Florida, but the warranty on our work comes from us, not from Amarr.
Styles & brands we work with






Signs Your Amarr Cable & Drum Replacement Is Failing
- The door hangs visibly uneven when fully open. One cable has stretched or begun unraveling, so the drum on that side is paying out less cable than the other. The tilt will get worse over days, not weeks.
- You see strands of cable poking through the winding. A frayed cable is a failed cable, full stop. The individual steel strands start snapping one at a time, usually near the drum or at the bottom bracket where the cable is anchored.
- The door jerks or shudders about two-thirds of the way up. The drum’s grooves are worn or the cable is riding over itself on the drum, which creates a skip-stick motion. You’ll hear a tick-tick-tick through the cycle.
- You hear grinding or a dry squeal from the top corners. Drum bearings on Amarr Heritage doors wear out before the drum itself, especially in Fort Lauderdale’s salt air if you’re within a mile or two of the beach. The noise fades when humidity spikes.
- The cable looks dark, rust-stained, or has kinks. Coastal corrosion is a real variable here in Fort Lauderdale. A kinked cable has lost its structural rating and should be treated as already broken. Rust staining is a warning it will snap under load.
Replacement Cost & What’s Included
Here’s the straight number for the Fort Lauderdale market. Most Amarr cable replacements run $130 – $250 installed for the pair, and drum replacement typically adds $40 – $80 per drum if the grooves are worn. The total for a typical single-door job usually lands between $170 and $330, parts and labor included.
The range depends on three things: whether it’s a single cable or the pair, whether the drum needs replacing or just the cable, and the door’s height and spring system. An 8-foot door costs slightly more than a 7-foot door because the cable runs longer and the drum ratio changes. No matter the number, you get the written price before any bolt turns. The price you approve is the price on the invoice. Period. Your repair is covered in writing for 365 days. If that cable or drum fails within a year, we return and make it right at no charge.
See the difference
Before
After
Before
After
Before
AfterDIY or Call Us?
Here’s the honest split, because we’d rather you know before you touch anything. You can safely inspect the cables visually. Look for fraying near the bottom bracket and any slack in the cable when the door is closed. You can also check whether the door feels balanced by lifting it manually to waist height and letting go. If it drifts down or jerks, something in the tension system is off. Those checks cost you five minutes and tell us a lot when you call.
What you should not do is attempt the replacement yourself. The cables are under hundreds of pounds of torsion-spring tension, even with the door fully open. If a cable snaps while you are working on it, the recoil can cause serious injury, and a wound cable that lets go can take the drum off with it. This is not a difficult job for a trained tech, and it is a genuinely dangerous job for a homeowner. If your Amarr cable is frayed or your drum is grinding, call us at (754) 354-7491. Wade Mercer’s rule on this one is simple: tell me what it’s doing and I’ll tell you what it needs.
FAQs
On a properly balanced door, Amarr cables typically last 8 to 12 years in this climate. Drum bearings wear out sooner near the coast, where salt air accelerates corrosion. If your door is within a couple miles of the ocean, expect to address cable or drum issues a year or two earlier than inland garages. Call (754) 354-7491 and we’ll tell you what condition yours are in.
No. Once an Amarr cable frays, kinks, or snaps, the structural integrity is gone. Splicing or re-winding a damaged cable is a temporary fix that fails under load, potentially when the door is open. Replacement is the only answer we’ll put our name on.
Most single-door Amarr cable and drum replacements take 45 to 90 minutes on site. If the drum is in good shape and only cables need swapping, it’s usually under an hour. We carry the common Amarr cable lengths and drum sizes on the truck, so there’s rarely a second trip.
We stock Amarr-compatible cables in the most common Fort Lauderdale sizes and the standard drum ratios for Heritage, Classica, and carriage-house lines. We also carry parts for LiftMaster, Chamberlain, and Genie openers. If your Amarr door has a non-standard height or drum, we’ll measure on site and have the part within one business day in nearly all cases. Call (754) 354-7491 and we’ll confirm what we have before we head your way.
Call Brock Garage Doors Fort Lauderdale for Amarr Cable & Drum Replacement
If your Amarr door is leaning to one side, grinding at the top, or showing a frayed cable, you’ve found the page that tells you what happens next. We’ll send a background-checked, uniformed technician to your Fort Lauderdale home, hand you a written price before any work starts, and back the repair with our 365-Day Done Right Promise in writing. A live person answers our phones 24 hours a day, every day, including weekends. Call (754) 354-7491 now and give us the symptom. Wade Mercer and the Brock crew will take it from there.
Written by Wade Mercer, Owner, Brock Garage Doors Fort Lauderdale at Brock Garage Doors Fort Lauderdale, serving Fort Lauderdale and nearby areas.