Raised-panel steel
Carriage house
Modern flush
Full-view glass
LiftMaster openers
Chamberlain openersFull 25-point door and opener safety check with every visit - springs, cables, rollers, tracks, and your LiftMaster or Chamberlain opener included
You get a price before we start. It does not change when the truck arrives.
Get your free estimateStyles & brands we work with
See the difference
Before
After
Before
After
Before
AfterHow Much Does Panel Replacement Cost in Fort Lauderdale?
Garage door panel replacement in Fort Lauderdale typically runs $250 – $500 for a single panel, including the service call, labor, and a factory-matched or custom-fitted panel. Most homeowners pay around $350 – $450 for a standard 16×7 door panel from a major manufacturer. The final number depends on the panel material, whether the door is insulated, and how many panels the impact damaged.
Panel Replacement Cost Breakdown (2026)
Here is what our techs see across Fort Lauderdale, from Victoria Park to Plantation and out toward Sunrise. These are the numbers we put in writing before any work begins.
| Line Item | Typical Cost Range | Notes |
|---|---|---|
| Single steel panel (non-insulated) | $250 – $350 | Standard 25-gauge steel, factory finish |
| Single steel panel (insulated) | $300 – $450 | Polystyrene or polyurethane core, better energy performance |
| Single aluminum panel | $275 – $400 | Common on coastal and mid-century doors |
| Wood-composite or custom panel | $400 – $500 | Custom routing or paint-to-match adds cost |
| Service call + labor (included in above) | $75 – $125 | Usually bundled; confirm it is not double-charged |
| Two-panel replacement | $450 – $800 | Brackets and hinge alignment often add a little |
| Full panel replacement in Fort Lauderdale (all 4 sections) | $700 – $1,500 | Often better value than buying a new door if the frame and track are sound |
What moves the price: material type, insulation, panel width (8-foot doors cost about 15 – 20% more), and whether the panel carries a wood-grain or smooth finish. Fort Lauderdale’s salt air matters too. Coastal sections like Harbor Beach and Rio Vista see more corrosion on uninsulated steel panels, which sometimes makes a full-section aluminum replacement the smarter call.
What Affects Panel Replacement Pricing in Fort Lauderdale
- Panel material and thickness. A 25-gauge steel panel is the workhorse and sits at the low end of the range. Aluminum panels, which we recommend more often east of US-1, run slightly higher because the material costs more and holds up better in salt air.
- Insulation rating. If your door is insulated, the replacement panel has to match. An R-12 polyurethane core panel costs more than a non-insulated panel, but matching the original keeps the door balanced and the garage temperature stable.
- Number of damaged panels. A single panel is usually $250 – $500. Two panels push the job to $450 – $800. Once you hit three or four panels, a full replacement starts making real financial sense, and we will say so plainly.
- Door brand and age. LiftMaster, Chamberlain, Genie, Clopay, Amarr, Wayne Dalton, Craftsman, and Raynor panels all price differently. Older doors may require a custom-cut panel because the exact factory stamp is no longer made.
- Location within Fort Lauderdale. Neighborhoods closer to the Intracoastal, such as Las Olas Isles and Coral Ridge, deal with more corrosion. That can mean additional prep work on the frame and hinges, which adds a marginal labor cost.
- Wind-load requirements. Fort Lauderdale sits in a high-velocity hurricane zone (HVHZ). Some doors require reinforced panels and heavier struts to meet Miami-Dade code. Those panels cost more, and ordering them takes a few extra days.
When Panel Replacement in Fort Lauderdale Makes Sense
Not every dented panel needs replacing. Here is the honest math our techs apply on every visit.
Replace the panel when:
- A single bottom panel took a car-bumper hit and the rest of the door is in good shape.
- A windstorm pushed a panel in but the track, springs, and opener are undamaged.
- The panel is less than 8 years old, so a factory match is still available.
- The door is a standard brand like Clopay or Amarr, which keeps panel cost predictable.
Consider a new door when:
- Three or more panels are damaged.
- The door is 15+ years old and the springs, rollers, and hinges are worn.
- The panel is so corroded that the surrounding sections will fail within a year or two.
In Fort Lauderdale, if the damage came from a storm hit, we also check the track alignment and the torsion spring, the thick coiled spring mounted above the door that bears most of the lifting load. A panel often absorbs the visible damage while the spring takes a shock that shortens its life. Replacing only the panel without checking the spring is how doors fail again two weeks later.
How to Save on Panel Replacement
Panel replacement is already less expensive than a full door install in most cases. You can keep the bill at the low end with a few practical moves:
- Act before rust spreads. Fort Lauderdale’s humidity accelerates corrosion. A small dent can become a rust-through problem in one wet season.
- Check your opener’s force setting. An opener pushing too hard against a slightly misaligned door is what damages panels in the first place. A quick adjustment during the visit prevents the next hit.
- Match the panel, not the door’s color exactly. Factory panels come primed and finished. Exact paint-to-match is an additional service. If the difference is on the inside face, skip the custom color.
- Ask about multi-panel pricing. Two panels replaced at once costs less per panel than two separate service calls.
Every estimate from us is free and written. You will know the exact number before a single bolt turns. Call (754) 354-7491 and we will schedule the visit.
Panel Replacement Process: Step by Step
Here is how a Brock Garage Doors Fort Lauderdale panel replacement job works, from first call to final inspection.
Step 1: Call and describe the damage
A live person answers 24/7, including nights and weekends. You describe the door, the damage, and the brand if you know it. We book the visit during the call.
Step 2: On-site inspection and written price
A background-checked, uniformed technician arrives at the scheduled window. They inspect the panel, the track alignment, the spring, and the opener. Then you get a written price. No work starts until you approve it.
Step 3: Panel order or same-day install
For common panels from Clopay, Amarr, Wayne Dalton, LiftMaster, and Chamberlain, we often carry compatible stock or can source it same-day. Custom or wind-rated panels take 3 – 5 business days. We tell you the timeline before leaving.
Step 4: Installation and balancing
The damaged panel comes off. The replacement goes on with factory-matched hinges and properly torqued bolts. We check the door balance and the opener’s force settings so the new panel does not get stressed again.
Step 5: Cleanup and written guarantee
The work area is left clean. You get a written 365-day guarantee. If the panel or the labor fails within a full year, we return and correct it at no charge. That is the Garrison Standard, and it is in writing on every job.
Wade Mercer, owner at Brock Garage Doors Fort Lauderdale, runs every call through this same sequence. The Garrison Standard is not a sales pitch; it is the internal checklist: arrive in the window, put the price in writing, do it by the book, leave it clean, stand behind it for a year.
FAQs – Panel Replacement Cost
How much does it cost to replace one garage door panel in Fort Lauderdale?
A single panel costs $250 – $500 including labor and the service call. Most single-panel jobs in Fort Lauderdale land between $350 and $450. For an exact quote, call (754) 354-7491; estimates are free.
Is it cheaper to replace a panel or the whole door?
Replacing one or two panels at $250 – $500 each is usually cheaper than a new door install, which runs $700 – $2,200 in Fort Lauderdale. But once three or four panels are damaged, or the door is over 15 years old, a new door often costs less per year of remaining service life. We will walk you through the math on the phone.
Can you match a Fort Lauderdale garage door panel to my existing door?
Yes, for doors from major brands like Clopay, Amarr, Wayne Dalton, Chamberlain, and Raynor. Common panel stamps are available same-day or within a week. Obsolete stamps can be custom-cut. Expect custom work to add $50 – $100 to the panel price.
Do you replace garage door panels the same day?
For standard steel and aluminum panels on common door models, yes, same-day is regularly possible. Wind-load-rated and custom panels in the Fort Lauderdale HVHZ market take 3 – 5 business days. A live person answers at (754) 354-7491 and can confirm availability.
How long does a replaced panel last in Fort Lauderdale’s climate?
A properly installed, factory-finished panel on a balanced door lasts 10 – 15 years in Fort Lauderdale, though coastal homes east of US-1 may see cosmetic corrosion sooner. Our panel work is covered by a written 365-day guarantee; if it fails in that window, we return at no charge.
Still wondering what your specific door will cost? Call (754) 354-7491 and we will walk through your door’s brand, panel count, and condition, then tell you the number. No pressure, no vague talk, just a straight answer.
Written by Wade Mercer, Owner at Brock Garage Doors Fort Lauderdale, serving Fort Lauderdale and surrounding Broward County neighborhoods since 2001.
Pricing reflects the Fort Lauderdale market as of 2026. Brock Garage Doors Fort Lauderdale offers free estimates – call (754) 354-7491.
What Our Customers Say
"Disciplined and polite. He did a full checklist on the door before leaving, even things I hadn't called about."
- Melody B."Opener was grinding. He found a stripped gear, replaced it, and tested the safety reverse twice. Left the garage cleaner than he found it."
- Trevor J."They treat the job like a mission. On time, no fuss, and they cleaned up their mess."
- Bonnie R.