Raised-panel steel
Carriage house
Modern flush
Full-view glass
LiftMaster openers
Chamberlain openersFull 25-point door and opener safety check with every visit - springs, cables, rollers, tracks, and your LiftMaster or Chamberlain opener included
You get a price before we start. It does not change when the truck arrives.
Get your free estimateStyles & brands we work with
See the difference
Before
After
Before
After
Before
AfterPanel Replacement in Fort Lauderdale, FL
Garage door panel replacement in Fort Lauderdale typically costs $180 to $600 per panel, depending on the door’s brand, material, and whether the panel is a standard size or needs to be cut to fit. Most panels can be matched and replaced the same week we order them. If you need the work done right, call us at (754) 354-7491 and we’ll give you a written price before any work starts.
A bent, cracked, or rotted panel does more than look bad. It throws off the door’s balance, strains the opener, and lets rain and humid air into the garage. Brock Garage Doors Fort Lauderdale replaces single panels and full-door skin sets for homeowners across the city, including Victoria Park, Coral Ridge, Rio Vista, and Sailboat Bend. We work under The Garrison Standard: show up in the window, put the price in writing, do the job by the book, and stand behind it for a full year. If you’re looking for broader Garage Door Repair in Fort Lauderdale, this is where panel work fits in.
The Fort Lauderdale climate shapes how garage door panels fail. Salt air off the Atlantic accelerates rust on steel panels near the ocean. High summer humidity gets behind paint and causes bubbling and delamination. Hurricane season brings windborne debris that dents lower panels. We’ve seen it all in this market, and Wade Mercer’s team knows which panels hold up and which ones aren’t worth our Garage Door Repair services.
When You Need Panel Replacement
Not every dent requires a new panel. Here’s when replacement makes sense rather than patching, bending, or ignoring the damage:
- A structural dent or crease that has cracked the panel’s surface or weakened the metal. Banged-out panels lose rigidity and flex under the door’s own weight, which wears out hinges and rollers faster.
- Rust through the bottom panel, a common sight in Fort Lauderdale’s flood-prone neighborhoods like Shady Banks and Melrose Manors. Once rust eats through the steel, patch jobs fail within months because the moisture is already inside the panel.
- Water damage, rot, or delamination on wood and composite doors. Swollen panels throw the door out of track alignment and make the opener work twice as hard, shortening its life.
- A panel struck by a vehicle. Even a low-speed bump can bow the panel enough that it catches on the track on the way up, and the misalignment strains every other component.
- Discontinued panel styles that can’t be matched. If your existing door is old and one panel can’t be sourced, a partial or full-door reskin is often cheaper than a complete door replacement.
- Hail and hurricane damage across multiple panels. After a storm, our techs assess whether you need one panel or several. We’ll give you a written number either way, so you can decide with your insurance claim in front of you.
Our Panel Replacement Process
Here’s how panel replacement works when you call Brock Garage Doors Fort Lauderdale:
- Call and talk to a person. A live person answers (754) 354-7491 around the clock, every day of the year, including nights and holidays. No voicemail trees.
- We inspect the door and find the problem. A background-checked, uniformed technician arrives inside the scheduled window and examines the damaged panel, the door’s balance, the hinges, and the track alignment. Panel damage often hides other issues.
- You get a written price before any work begins. The number on the estimate is the number you approve. We don’t start until you give the go-ahead, and the invoice doesn’t change at the end.
- We match and install the replacement panel. Where the panel is stock, we order the exact brand match for your LiftMaster, Chamberlain, Genie, or Clopay system. Where a panel is custom, we cut and finish it to match the rest of the door’s dimensions and color.
- We rebalance and test the full door. Replacing a panel changes the door’s weight distribution. We re-check the spring tension, the track alignment, and the opener’s travel limits so the door runs true and quiet.
- We leave the garage clean and the guarantee in your hand. The 365-Day Done Right Promise is written, not verbal. If the panel fails inside a year, we return and correct it at no charge.
Panel Replacement Pricing in Fort Lauderdale
The cost of garage door panel replacement in Fort Lauderdale depends on the door’s material, the number of panels, and whether the manufacturer still produces the matching style. Here’s what homeowners in this market typically pay:
| Service | Typical Price Range |
|---|---|
| Single steel panel replacement | $180 – $300 |
| Single aluminum or composite panel | $220 – $400 |
| Custom cut panel (non-standard size) | $300 – $550 |
| Wood panel refabrication | $350 – $600 |
| Full door reskin (all panels) | $800 – $1,800 |
Where you live in the Fort Lauderdale area matters less than the door’s age and brand. Doors from the late 1990s and early 2000s often have panels no longer in production, which pushes you toward a custom-cut option or a reskin. Newer doors usually have stock panels available within a few days. We’ll be straight with you about which route costs less in the long run.
Every estimate is free, and every price is handed to you in writing before work starts. Call (754) 354-7491 and we’ll schedule the inspection at a time that works for you.
Is It Cheaper to Repair or Replace a Panel?
Repairing a dented panel costs less in the short term, but here’s the truth: a patched panel often fails within a year or two because the metal’s structural integrity is already gone. Replacing the panel is the better investment the moment the damage is structural. Call (754) 354-7491 for an honest assessment and a written price on both options.
FAQs – Panel Replacement
How much does it cost to replace a garage door panel in Fort Lauderdale?
A single steel garage door panel replacement in Fort Lauderdale typically runs $180 to $300, while custom-cut or wood panels range from $300 to $600 depending on size and material. Call (754) 354-7491 for an exact written quote. Estimates are free.
Can you replace one panel, or do I need a whole new door?
You can replace a single panel when the door’s manufacturer still makes that panel style and the surrounding structure is solid. If the panel line is discontinued or the door has sustained damage across several sections, a reskin or full replacement is usually the better use of your money.
How long does panel replacement take?
For stock panels, the installation itself usually takes one to two hours once the panel is on hand. For custom-cut panels, expect a few days to a week for fabrication. We’ll give you a clear time frame in writing when we quote the job.
My panel has a dent but the door still works. Should I replace it now?
Do it now. A dented or bowed panel places uneven load on the hinges, track, and opener, and those parts will wear out faster than they would if the door ran true-often requiring Roller Replacement or other repairs. Early replacement is almost always cheaper than the cascade of repairs that follows.
Can you come today?
Call (754) 354-7491 and a live person will tell you the earliest available window. We operate around the clock in Fort Lauderdale, so same-day and next-day appointments are often available.
Why Brock Garage Doors Fort Lauderdale
Brock Garage Doors Fort Lauderdale is an independently owned and operated location within the Garrison Partners network. That means you get a local team that knows Fort Lauderdale’s climate and a company held to a national operating standard. The Garrison Standard isn’t a slogan. It’s a specific set of commitments: arrive in the scheduled window, put the price in writing, do the work to manufacturer spec, leave the site clean, and back the repair for 365 days in writing.
Our technicians are background-checked, uniformed, and trained on eight major brands, including LiftMaster, Chamberlain, Genie, and Clopay. That training matters because a panel replacement isn’t just swapping a slab of metal. The panel has to match the door’s weight, the Spring Repair system has to be rebalanced, and the opener’s settings need to be re-verified. A generic fix turns into a returning problem. We don’t do generic.
We also know the neighborhoods. In Fort Lauderdale, doors near the Intracoastal and the beachfront rust faster. Doors in older sections like Tarpon River and Croissant Park tend to have replaced tracks and re-tuned springs, which means panels have to be measured against what’s actually there rather than what the original spec said. Our team has worked those blocks long enough to know what to expect.
Call Brock Garage Doors Fort Lauderdale for Panel Replacement
If a panel is dented, rusted through, or delaminating, don’t wait until the track, springs, and opener pay the price-often starting with Sensor Calibration issues. Call (754) 354-7491 for a free estimate. We’ll assess the damage, put the number in writing, and if the work makes sense, we’ll do it to The Garrison Standard, guaranteed in writing for a full year. A real person answers around the clock, every day of the year.
Written by Wade Mercer, Owner at Brock Garage Doors Fort Lauderdale, serving Fort Lauderdale.